Then I got started with hooking up one indoor unit at a time
I was genuinely happy when I had my current ductless mini cut delivered to my home. There were quite a few weird boxes, however that’s because I had a 5 zoned Heating plus Air Conditioning idea here. The best section was that it is DIY so there is no need for a professional replacement. I basically had the replacement video memorized, but I still kept it on my PC as a reference to make sure I didn’t miss any important steps. One step that I already had completed before the current Heating plus Air Conditioning idea arrived was the slab to hold the outdoor condenser unit. I found the perfect spot, dug into the ground a little plus poured sand to level the area. Then I set up a wood frame to pour the concrete mixture. I filled it half way plus then put in my metal bar supports to keep the concrete slab stable separate from cracking. Then when that was ready, I poured the remainder of the concrete into the slab plus of course made sure everything was leveled off appropriately. Everything was dried plus ready to go when my Heating plus Air Conditioning arrived. Then I got started with hooking up one indoor unit at a time. It truthfully took me numerous afternoons to finish this replacement, however it was worth the strenuous work! I truthfully considered calling in an electrician to take care of the electric hookups. Fortunately, I figured out how to install the utility shut off plus I installed a small fuse box with a 30 amp fuse to connect to the Heating plus Air Conditioning. The electric section was not genuinely easy, however now I have an amazing Heating plus Air Conditioning idea in my home with 5 zones!